.jpg)
Type KR3000
Which type of shelf decking is right for me?
10560 Items
Combining cantilevers of different models, such as between KR3000 and KR6000, is technically not feasible. However, a mixture of different arm lengths, for example 50 cm and 100 cm, is certainly feasible. The important thing here is that the cantilever arms do not protrude beyond the cantilever feet. A combination of 50 cm and 100 cm cantilever arms would require a shelf upright with a depth of 100 cm.
Depending on the type of cantilever racking, our cantilever bays are available in painted and hot-dip galvanized versions (both versions for the KR3000 / KR6000).
The individual cross and diagonal braces are mounted to the bracket of the shelf uprights with the corresponding hexagon bolts, hexagon nuts and washers.
Depending on the height of your shelves, the number of struts (cross and diagonal struts) varies.
You will find the appropriate number of braces in the article description and in the assembly instructions.
The axial dimension is the internal dimension between two shelf uprights. Depending on the cantilever type, we offer these fields in 120 cm (KR2500) and in 100 cm / 150 cm (KR3000 / KR6000).
A rubber strip on cantilever racks is primarily used to protect your stored goods and the cantilevers from potential damage. No additional assembly is required to attach them. The rubber strips are simply glued directly to the desired cantilever arm. For our models KR3000 and KR6000 we offer special matching rubber strips.
Available bay sizes vary depending on the specific cantilever rack model:
- KR2500: Provides bays 120 cm wide, bracing included.
- KR3000: Offers bays in 100 cm and 150 cm sizes, both including bracing. These are also available in a hot-dip galvanized version.
- KR6000: This model also offers 100 cm and 150 cm bays with bracing and is available in a hot-dip galvanized version.
The scope of delivery includes the appropriate number of screws for cantilever racking assembly. The following screws are used for a cantilever racking system:
Bolt anchor, hexagonal bolts / nuts, washer, compensation wedge etc.
With certain models of our cantilever racks you can flexibly adjust the height of the cantilever arms. The KR3000 and KR6000 models offer the possibility to adjust the cantilever arms individually in 5 cm steps. In contrast, the arms of the KR2500 system are permanently welded and do not allow any height adjustment.
Cantilever racking is ideal for the storage of long goods, e.g. wooden beams, steel profiles, pipes and much more. You can additionally equip the cantilever racking with wooden or grating floors, so that the storage of other stored goods is also possible.
Cantilever racking is always fixed by anchoring it to the ground.
A combination of KR3000 and KR6000 is not possible.
Only a combination of the arms is possible with the KR3000 (50 cm, 100 cm, 125 cm) and the KR6000 (75 cm, 150 cm), as the arms of the cantilever racks for light loads KR2500 are firmly welded to the rack upright.
If you want to combine two arm lengths in your rack, the rack upright must be used in the greater depth for safety reasons, e.g. in 100 cm depth (KR3000) and in 150 cm depth (KR6000).
Here you can find an overview of our cantilever racks.
Of course we also offer shelves in individually adapted dimensions. Please send us an inquiry by e-mail to [email protected] or call our customer hotline 01495 707222.
You can find our contact form here.
KR3000 cantilever rack
- Rack height: 2 m – 4 m
- Single- and double-sided cantilever racking with arms that can be freely repositioned in 5 cm height increments
- The cantilever uprights are connected using cross and diagonal braces
- The upright profile is bolted to the base
Straightforward assembly- Competitive price
- All components included
Straightforward assemblyAssembly instructions
The quality of our products
Voluntary inspections of our cantilever racks
To obtain an independent assessment of our quality, we have our products inspected voluntarily every year.
The racks are tested for load capacity, rigidity and stability.
The load notices included in the scope of delivery state the maximum shelf and bay loads.
Versions
Painted for indoor use
Single- and double-sided versions
View prices and the product overview
Hot-dip galvanised for outdoor use
Hot-dip galvanised racks for outdoor installation
Overview of KR3000 cantilever-rack uprights
Single-sided upright
Stability provided by a T-beam
Double-sided upright
2 different depths – 50 cm arm depth (80 cm base depth) and 100 cm arm depth (130 cm base depth)
The complete rack upright consists of a double C-profile and a T-beam-shaped base. The upright profile is bolted to the base.
Upright
Versions and dimensions
Upright load
Single-sided max. 1500 kg
Double-sided max. 3000 kg
Load capacities apply when the load is evenly distributed
Upright assembly
Load on the base section
The base sections of the cantilever rack have no specified load limit.
Technical information
Floor anchoring
Required components:
Assembled rack, bolt anchors
- Drill holes: 12 mm diameter, 100 mm deep
- Blow out the holes
- No base-plate bracket is required. The holes are already integrated into and predrilled in the base section
- Drive in the bolt anchor with the base-plate bracket – the nut should sit flush with the thread
- Tighten the anchor securely
- After tightening, the marking on the thread must no longer be visible.
Please note:
The bolt anchors must be fitted professionally.
Our in-house installation team will be happy to assemble your racks professionally.
Centre-to-centre distances
- The centre-to-centre distance describes the width of a rack bay and the distance between two uprights
- We offer two different centre-to-centre distances in widths of 100 cm and 150 cm
- The different centre-to-centre distances can be freely combined
- Configure your cantilever rack with the required bay lengths. Thanks to their modular design, our racks can also be extended at any time after installation
Brace assembly
Technical information
Installing the cross and diagonal braces
Required components:
Diagonal brace, cross brace, hexagon bolt, hexagon nut, washer
- The cross and diagonal braces are fitted directly to the upright profile using M10*80 hexagon bolts, M10 washers, M10 nuts and retaining plates
- Assembly takes only a few minutes using a 17 mm open-ended spanner and a ratchet with a 17 mm socket
The diagonal and cross braces stiffen the structure between the uprights and increase stability
Cantilever arms
Max. load per arm = 500 kg
The arm is suitable for single- and double-sided versions.
Arm load
- Total load per cantilever arm
Maximum 500 kg when the load is evenly distributed
Cantilever-arm assembly
Technical information
Installing the cantilever arms
1. Position the cantilever arm at the required height
2. Hook in the locking bolt
3. Fit the safety pin
4. Fit the roll-off protection
Cantilever-arm accessories
Cantilever-arm divider
For dividing cantilever arms into separate storage sections
Cantilever-rack rubber strip
Protects against scratches and slipping
Application examples
Ideal for long items
