Mobile racks & tables
Mobile racks & tables
Mobile tyre racks & tyre trolleys
Mobile storage racks & worktables
Mobile kanban racks & tables
Configurable mobile racks & trolleys
Uprights overview – mobile racks & tables
Painted stands – heights
- variable heights
- Unit load capacity: 500kg
- Complete upright incl. struts, assembly material and height-adjustable feet with castors
- The axial dimension describes the width of a shelf unit as well as the distance between two uprights
- We offer axial dimensions of 110cm and 220cm
- Configure your mobile rack or mobile table to meet your needs with the unit lengths you require.
Securing the beams
Required parts: Pre-assembled rack upright, beam, safety pin
Place the pre-assembled uprights in the required position and attach the beams to the upright at the desired height on both sides. Insert the safety pins into the hole provided in the beam.
The beams can be attached at 50mm increments.
Please note: Attach the last beam at least 50cm before the end of the upright!
Shelves for mobile racks & tables
(Optional for the tyre rack)
Individual levels can also be equipped with a shelf to store useful items such as tools used for assembly, rim cleaner, grease, wheel nuts etc. Mobile shelves or mobile tables/trolleys can be adapted to meet your individual requirements.
Height-adjustable foot & castor assembly
Required parts: Upright profile, height-adjustable foot part, movable foot part with brake, M8x20 screws, washers, M8 nuts
The castor is fixed to the height-adjustable foot part from below using 4 M8x20 screws, M8 nuts and washers.
The upright profiles are pushed over the foot part and fastened at the desired height using 3 M8x20 screws and washers each. (adjustable in 5cm increments)
Please note: The roller can be variably (dis-)assembled as needed. This means that the table or rack can also be retrofitted for use as a stationary or mobile variant.
Back & side panels
Back and side panels can be fitted between the uprights as push-through protection, have a perforation spacing of approx. 2.8cm and are therefore compatible with common applications.
Side panels are available in depths of 60cm + 80cm, back panels are available in widths of 110cm + 220cm
Tool holder sets
Our tool and machine holder sets are designed for use with our own perforated panels and are ideal for storing all types of tools. The sets feature different tool holders in various lengths and designs. The individual elements can be attached to our side panels / perforated panels using a simple plug-in system without any assembly material.
Mobile lockers & cupboards
Thanks to their special design, our metal cabinets & lockers are compatible with the stepped beams used for our storage racks.
This means that the cabinets can be simply placed on top of the beams without any further assembly and are self-fixing.
This allows them to be used as a mobile cabinet and locker variants
The high-quality, two-coloured metal cabinets can withstand even the toughest everyday workshop conditions.
Operational safety / regulation – DIN EN 15635, DGUV 108-007
Collision protection for shelving systems
Collision protection for avoiding possible damage to the rack upright.
Corner areas with forklift traffic must be equipped with collision protection in accordance with DIN EN 15365 & DGUV 108-007.
Our collision protection is tested and certified according to the specifications of DGUV 108-007 (formerly BGR234).
Each collision protector is supplied with four bolt anchors M12x100mm for securing to the floor.
Accessories – suitable for use with mobile racks & tables
Cupboards & lockers
Go to > cupboards & lockers
Go to > collision protection for racks
Different widths available > magnetic tapes
Height adjustment plates
Go to > washers/levelling plates
Mobile shelving and mobile tables for flexible use
All mobile racks, or roll racks, shown here in the relevant subcategories are variants assembled by us as complete racks, which in our experience fulfil the majority of our customers’ needs. We have a mobile solution ready for almost any customer requirement for a flexibly usable rack. All models are equipped with swivel castors with brakes to ensure maximum freedom of movement and safety. By removing the castors, the mobile rack can be turned into a stationary heavy-duty rack in a matter of seconds.
The storage rack forms the basis for the innumerable variants of the mobile racks and mobile tables shown here. With just a few clicks, a tyre trolley can be turned into a mobile storage rack by adding a wooden shelf. If you add a round beam at the front and lift the back of the shelf a few increments higher, you get a mobile kanban rack in no time at all. If this is shorter than 1.30m, it can be used as a mobile worktable or mobile workbench. Add a suitable perforated panel for tool holders, tool cabinets or other accessories and your flexible everyday helper will leave nothing to be desired.