Cantilever rack configurator
The cantilever shelving configurator from TOPREGAL takes you to your individually planned cantilever shelving system in just a few clicks. The user-friendly interface of the cantilever shelving configurator makes planning easier and allows you to design the shelving to measure. With the practical share function, you can also save the planning afterwards and send it as a link to the entire team.
The sketch shown here is a compilation of the individual parts required for the configuration and not a construction plan. If you require shelves in different heights, with different levels and / or varying arm lengths, please configure one individual shelf first and then, as an add-on unit, the second individual shelf with different configurations (height / levels / arm depths). The enclosed assembly instructions are essential for correct assembly. We will be happy to help you with your desired configuration. Dimensions given are approximate and may vary by a few centimeters. Please contact us if you require the exact dimensions for your desired shelf. All specifications refer to evenly distributed loads. When loading your shelving unit, the upright and arm load as well as the load on the supports must not be exceeded. In principle, the current guidelines of the German Social Accident Insurance (DGUV:108-007, formerly BGR234) apply when using our shelving. The customer is obliged to observe the rules for assembly and selection of a suitable assembly site, in particular the inspection of the floor conditions and load. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be happy to answer any questions you may have.