Storage rack configurator
Shelves
If you wish, you can also select different shelves for your various compartment levels to suit your requirements. The following shelves are available for our mobile racks & tables:
No shelves
Optimally suited for the storage of tyres and rims
Wooden boards
For storing dry goods, e.g. cartons
Steel board
For the storage of e.g. liquids and hazardous goods
Galvanised mesh
For the storage of e.g. liquids and hazardous goods
Inclined wooden shelf
Including drop protection for the storage of e.g. open fronted storage bins
Multiplex board
Made of beech wood, ideal as a worktop
- 2m
- 2.5m
- 3m
- 3.5m
- 4m
- 40cm
- 50cm
- 60cm
- 80cm
- 100cm
- 120cm
All data refer to evenly distributed loads. When loading your rack, neither shelf nor bay loads may be exceeded. Loading may only be carried out by hand. In principle, the current guidelines of the German Social Accident Insurance (DGUV:108-007, formerly BGR234) apply when using our racks. The customer is obligated to observe the rules set forth therein for assembly and selection of a suitable assembly location, in particular the necessity of anchoring to the floor as well as the associated examination of the floor condition and load. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have.
Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.
With a few clicks to the desired shelf
Do you want to set up or expand your warehouse, or are you planning to move? With the practical online storage rack configurator you can plan the number of storage racks in advance. This way you can easily determine how your shelving system should look like in the future: The width of the shelf, the height and the number of levels can be individualized. A shelf with metal topping, wood or wire mesh is easily chosen. The shelves made of the different materials can also be combined with each other.
No matter whether single-sided storage shelving or double-sided storage shelving. At the touch of a button, you can double your planning, adjust the maximum load of the support or set the depth of the shelving. In this way, you can plan your very own shelving systems, such as a workshop shelving unit, a basement shelving unit, a wide span shelving unit or a storage shelving unit for the logistics centre. The possibilities are versatile.
This is how it works...
In the upper area of each shelving bay, adjustments are made to the shelving bay. Here you can choose the number of levels, height, depth and width as well as a ram protection / collision protection. Within the storage rack you can also make changes to individual levels. Here you can choose the shelf supports per level. If you wish to increase the height of the shelf headers by 50 cm, select the end support increase on the outer shelf bays.
It is just as easy to add another shelf bay as it is to remove one or to add the entire design to the shopping basket. With the trash can symbol you can reset the entire planning to its original state and you can plan another individual storage rack system online. With the share function above the planning sketch, you can easily save your planned shelving for later and share it with your colleagues or superiors. The generated link can then be sent by e-mail.
Information about our shelving systems
The technical data for the configuration can be found at the bottom of the page, as well as further information material about our storage racks. If you have any questions about our configurator or our storage racks, please contact our customer service via online chat, e-mail or phone.
