Storage racks, longspan racks
Each storage solution is adapted differently to the respective requirements. But one thing remains the same: if you need a storage rack, you need a stable storage rack that can withstand a lot. Due to the wide range of possible uses and the stable construction, our longspan racking is suitable for any warehouse.
A sophisticated, boltless system allows your new storage racks to be assembled quickly and easily. The compartment load of the heavy-duty storage racks is 500kg, the unit load capacity is 2000kg – perfectly suited to store a wide range of different goods including bulky and very heavy items. All our storage racks are not appropriate for mechanical loading with forklifts or similar.
Storage racks, longspan racks Top seller
Type LR2000 storage rack
The quality of our products
Voluntary inspection of our storage racks
We voluntarily submit our products to external quality control on an annual basis.
The shelves are tested for load, rigidity and stability.
The maximum compartment and unit loads are listed on the load labels included in the delivery volume.
Painted for indoor use
Examples of possible configurations
Overview of the uprights for storage rack LR2000
- variable heights
- Unit load capacity: 2000kg
- Complete upright incl. strutting and foot parts
Unit, compartment and point load capacity
Unit load capacity max. 2000kg
- Total load capacity between 2 horizontal bars
Compartment load capacity max. 500kg per level
- Total load-bearing capacity per beam level or per shelf
Point load capacity per foot plate with evenly distributed load max. 1000kg
- The rack’s upright generates a point load on the floor
Ground anchoring foot plate
- Drill holes: 8mm Ø, 80mm deep
- Blow holes clean
- Push bolt anchor into the drill hole
- Tighten the nut firmly with a fork wrench or similar
If the height of the top shelf is less than 5 times the shelf depth, the rack does not need to be fixed or secured against tipping.
Please note: The bolt anchors must be properly fastened.
Our in-house assembly crew are happy to provide professional assembly of your racks.
- The axial dimension describes the width of a shelf unit as well as the distance between two uprights
- We offer axial dimensions of 110cm and 220cm
- The axial dimensions can be freely combined with each other
- Customise your storage rack with your desired unit lengths. Due to the modular design, the racks can also be expanded retrospectively at any time.
Securing the beams
Required parts: Pre-assembled rack upright, beam, safety pin
Place the pre-assembled uprights in the required position and attach the beams to the upright at the desired height on both sides. Insert the safety pins into the hole provided in the beam.
The beams can be attached at 50mm increments.
Please note: Attach the last beam at least 50cm before the end of the upright!
Storage rack with shelving
Wooden shelf, consisting of 25mm-thick chipboard: the wooden shelf is inserted into the stepped beam and is thus fixed and stabilised. Load capacity with an evenly distributed load: max. 500kg.
Steel shelf consisting of modules measuring 110cm each: The steel shelf is inserted into the stepped beam. The shelf is thus fixed and stabilised. Load capacity with an evenly distributed load: max. 500kg.
Galvanised mesh shelf
Galvanised mesh shelf consisting of modules measuring 110cm each: The steel shelf is inserted into the stepped beam. The shelf is thus fixed and stabilised. Load capacity with an evenly distributed load: max. 500kg.
Shelf made of multiplex board, 25mm thick: the multiplex board is inserted into the stepped beam and is thus fixed and stabilised. Load capacity with an evenly distributed load: max. 500kg
Wall mounting / connecting
Colour: TOPREGAL blue (corresponds to RAL 5010).
For rack upright heights of up to 2.5m we recommend the use of 2 spacers.
For heights above 3m we recommend the use of 3 spacers.
All assembly material is included in the price and delivery volume.
Go to > spacers
Operational safety / regulation – DIN EN 15635, DGUV 108-007
Collision protection for shelving systems
Collision protection for avoiding possible damage to the rack upright.
Corner areas with forklift traffic must be equipped with collision protection in accordance with DIN EN 15365 & DGUV 108-007.
Our collision protection is tested and certified according to the specifications of DGUV 108-007 (formerly BGR234).
Each collision protector is supplied with four bolt anchors M12x100mm for securing to the floor.
Accessories – suitable for LR2000
Cupboards & lockers
Go to > cupboards & lockers
More than just a storage rack – flexible longspan racks from TOPREGAL
Each storage solution is adapted differently to the respective requirements. But one thing remains the same: if you need a storage rack, you need a stable storage rack that can withstand a lot. Due to the wide range of possible uses and the stable construction, our longspan racking is suitable for any warehouse. Our metal storage racks can be ordered as a complete unit or in individual parts (beams, rack uprights, shelves, etc.). What’s even better: they can also be customised.
A sophisticated, boltless system allows your new storage racks to be assembled quickly and easily. The compartment load of the heavy-duty storage racks is 500kg, the unit load capacity is 2000kg – completely adapted to the requirements in the warehouse. The longspan racks are perfectly suited for storing a wide range of different goods including bulky and very heavy items. The different shelves – made of wood, steel or galvanised mesh – offer corresponding advantages depending on the goods to be stored. Steel shelves or steel panels are perfect for storing liquids, as they can be thoroughly cleaned, should anything be spilled.
All metal storage shelves shown here can be extended retrospectively in any way you like with additional uprights or additional pairs of beams. Using rewritable white magnetic tape, it is super easy to affix labels to the storage rack that can be wiped off and replaced at any time. Our extensive range of storage rack accessories such as magnetic tape for labelling, storage boxes, perforated panels and side panels and much more complete the range of accessories for storage racks.
Compatible tool cabinets and metal lockers
Due to the special design of our tool cabinets & lockers, they are compatible with our storage racks and can be stored or retrieved without assembly. The depths of the longspan rack and the cabinets have been designed in such a way that they are perfectly flush with the stepped beam of your rack, fixing themselves in place.
Use this practical addition for tidy storage of your work clothes, tools or other materials, for example, in a lockable area.
Inspection of the storage racks
Our in-house TOPREGAL rack inspectors will be more than happy to carry out the annual inspections of your racks that are required by law. On request, we can also inspect storage racks that haven’t been purchased from us. Don’t delay and make an appointment for your next inspection.