Storage racks and accessories

We offer you our storage rack in the depths 40 cm, 50 cm, 60 cm, 80 cm, 100 cm and in 120 cm.

For an overview of the shelf stands with the heights and depths we offer click here.

The individual levels can be hung or attached individually as desired in a grid spacing of 5 cm.

The number of levels depends on the height / weight of your stored goods. A prerequisite is always the even distribution of the loads (shelf load: max. 500 kg, bay load 2000 kg - storage rack).

Fixing our racks to the wall is not permitted.

Pallet racks must be anchored to the floor according to DIN EN 15512 & DIN EN 15635.

Storage racks must be fixed to the floor from a depth / height ratio greater than 5:1. Below this no anchoring is required.

Our spacers are used exclusively for the parallel positioning of our shelves.

The maximum weight that a rack can carry in total is called the bay load (C). However, the rack's own weight does not count towards this (the storage rack has a bay load of 2000 kg).

The maximum weight that can be carried by a single shelf is called the shelf load (B) (the storage rack has a maximum shelf load of 500 kg).

The sum of the shelf loads (B), however, must not exceed the bay load (C). A prerequisite (for the weight specifications) is basically the even distribution of the loads. Point loads (A) are the forces acting on the floor at one point, also known as concentrated loads.

The figure shows point load (A), shelf load (B) and bay load (C) using the example of a storage rack.

Of course, we also offer shelves in customised dimensions. Please send an enquiry to info@topregal.co.uk, or contact us by calling our customer hotline 01495 707222.

You can find our contact form here.