4,6 m tyre rack RR2000 / 40 cm deep / 2,5 m high / 4 levels for approx. 96 tyres
- Simple storage of 96 complete tyres or individual rims
- Straightforward assembly in just a few steps
- Tyre rack is highly versatile and can be expanded
- Other rack types, such as kanban and storage racks, can be integrated
- High unit load capacities of 2.000 kg
- Simple storage of 96 complete tyres or individual rims
- Straightforward assembly in just a few steps
- Tyre rack is highly versatile and can be expanded
- Other rack types, such as kanban and storage racks, can be integrated
- High unit load capacities of 2.000 kg
-
ModelRR2000
-
Number of levels4
-
Rack layerWithout
-
Width4,600 mm
-
Depth400 mm
-
Height2,500 mm
-
Max. Load per field2,000 kg
-
Max. Load per level400 kg
- 3 x tyre rack upright 2,5 m high / 40 cm deep, unit load capacity: 2.000 kg
- 16 x tyre rack beams 220 cm wide, compartment load capacity: 400 kg
- All material required for assembly, such as foot plates, screws, nuts and bolt anchors, are included
- Load capacity labels in accordance with the German DGUV 108-007 specification (formerly BGR 234)
- Assembly instructions
- 5 Years warranty
- Simple storage of 96 complete tyres or individual rims
- Straightforward assembly in just a few steps
- Tyre rack is highly versatile and can be expanded
- Other rack types, such as kanban and storage racks, can be integrated
- High unit load capacities of 2.000 kg
Tyre racks are highly practical when you need to store car tyres with and without rims. This complete tyre rack, with dimensions of 4,6 m x 40 cm x 2,5 m, comprises 4 levels. The number of units is 2. A total of 96 tyres can be stored in this tyre rack. The modular design of our tyre racks means additional levels can be added and the width can be expanded with additional units, with different unit lengths.
The load capacity of the tyre racks from TOPREGAL is 400 kg per level. The unit load capacity, corresponding to an evenly distributed total load between two uprights, is 2.000 kg.
The tyres are stored on the orange stepped beams, which are attached to the blue upright with a simple plug-in design and secured against being accidentally lifted out with safety pins. This design allows the height of the beams to be individually adjusted in increments of 50 mm. This increases versatility in use. It is also possible to fix the tyre rack to the wall with wall brackets. You will find these in our online shop. Stability is guaranteed with the robust rack uprights, which are fixed to the floor with four bolt anchors in size M8 x 55 mm.
The tyre rack impresses with its attractive appearance as well as its durable and stable construction. All accessories such as screws, nuts, safety pins and all material required for assembly are included.
Important information
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.