HDR150 pressure washer, 2.000 W, 150 bar, 0,13 l/s, wipeket

 ★ ★ ★ ★ ★ 

 ★ ★ ★ ★ ★ 

(12)

Clean results with high pressure

Our new pressure washer, the HDR150, cleans even stubborn dirt from solid surfaces quickly without leaving any residue. This is made possible by the extra-high pressure produced by the powerful 2.000 W motor. In combination with the integrated high-performance aluminium pump, the professional pressure washer reaches spray pressures of up to 150 bar. This removes stubborn dirt from joints and large areas such as concrete floors, glass panes and tiles. The 500 cm power cable, which can be plugged into any standard 230 V socket, and the 500 mm spray hose help to avoid frequent plugging and unplugging while working so that cleaning can be carried out for long periods at a time.

Good handling thanks to a smart design

The HDR150 pressure washer not only has an impressively high performance, but also a slim and practical design that makes it easy to handle. There are two valves at the front of the cleaning machine that allow clean water to be sucked in and transported to the nozzle on the spray gun. This can be stored in an eyelet on the side when the pressure washer is parked, so that none of the components need to be left on the ground. The flexible PVC hose can be easily wound onto the hose reel, keeping it tidied away when not in use. It can be unwound smoothly using the lever on the side of the reel. The ergonomic height of 730 mm and the light weight of the washer ensure comfortable handling at all times. The narrow, robust design and the two PP castors with a diameter of 150 mm make it quick and easy to transport, even over uneven ground. The practical handle is at a comfortable height, perfect for pulling and pushing the pressure washer.

Flexible cleaning with the HDR150

Various settings on the machine allow you to clean at high or low pressure, with or without cleaning agents and with high or low water flow. The amount of water that is sucked in and pumped through the machine can be raised or lowered using the handy dial on the front of the pressure washer. The water pressure can be regulated right on the cleaning gun’s spray nozzle. If the cleaning machine is operating in high-pressure mode, no cleaning agent is fed in. This is intended for use in low-pressure mode. This allows very dirty surfaces to be wet with cleaning agent first, before being cleaned with high pressure without any residue or dirt left behind. The cleaning agent can easily be poured into an extra container on the rear of the pressure washer. The HDR150’s compact and practical design allows you to clean different surfaces quickly, flexibly and efficiently.

wipeket at a glance

High cleaning performance, efficient dirt removal and an ergonomic and comfortable working position – these are the principles on which all our cleaning machines are developed and produced. Experience the high quality of wipeket cost-effective cleaning equipment.