All products

4,9 m cantilever rack KR3000 / hot-dip galvanised / one-sided / 4 m high / 100 cm cantilever depth / 4 levels
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
(32)

Discounts of up to 10% on the value of your cart!
£ 2,000
3 %
£ 5,000
5 %
£ 10,000
10 %
Technical data & downloads
Article No. 9988-vz
  • Model
    KR3000
  • Beam length
    1,500 mm
  • Max. Load per stand
    1,500 kg
  • Version
    one-sided
  • Number of levels
    4
  • Rack layer
    without
  • Surface
    hot-dip galvanised
  • Width
    4,900 mm
  • Depth
    1,000 mm
  • Height
    4,000 mm
  • Range of application
    outdoor
  • Axle dimension
    1.500 mm
Delivery volume
  • 4 x upright / 4 m high / max. load 1.500 kg (type: KR3000 galvanised)
  • 3 x cantilever rack unit (strutting) for 4 m height, axial dimension 1.5 m (type: KR3000 galvanised)
  • 16 x cantilever 1.000 mm deep up to 500 kg (type: KR3000 galvanised)
  • All material required for assembly
  • Load capacity labels in accordance with German DGUV 108-007 specification (formerly BGR 234)
  • 5 years warranty
  • Efficient storage of goods such as wooden boards or tubes
  • Extra-robust design
  • Enormous load capacity with up to 1.500 kg per stand
  • Cantilevers can be attached individually in increments of 50 mm

The TOPREGAL cantilever racks KR3000 feature a particularly robust, modular and flexible design.

This cantilever rack in a single-sided design with a width of 4,9 m is 4 m high, with an overall depth of 130 cm, and features 4 cantilever levels, with a cantilever depth of 100 cm. The maximum load per cantilever is 500 kg. The cantilevers can be attached at individual heights in increments of 50 mm and are secured with safety bolts and pins. The foot parts can also be used as a storage level (depending on the goods). To protect the load from accidentally slipping, roll-off protection can be attached at the end of each cantilever. This is included as standard in the delivery volume. 

The upright load is maximum 1.500 kg. The axial dimension (inner dimension between two uprights) is generally 150 cm. At specific widths, the rack ends with a unit with an axial dimension of 100 cm. Best of all, you can extend your rack in terms of width or number of levels at any time.

The surface of this rack is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores, in corrosive environments or similar.

This cantilever rack of the KR3000 type has no shelf support.

......read more
Notes

Important information

All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.

 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
(ᴓ 4.81 / 5.00)
Our independent rating partner "Trusted Shops" has established various measures to ensure that the ratings shown here only come from consumers who have actually purchased the products. A detailed description of the measures can be read at Trusted Shops.
Relevant ratings
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
19.07.2023 based on Art. No. 6652
Inferior quality and screws were missing.
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
31.05.2023 based on Art. No. 87902
everything fits perfectly
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
23.04.2023 based on Art. No. 6616
Easy to handle
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
15.03.2023 based on Art. No. 95763
Quick and easy assembly
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
17.01.2022 based on Art. No. 10177-vz
all good
Read original
trusted shops
Buyer protection included
Excellent
4.87 /5.00