Type KR2500
Cantilever rack KR2500
22 Items
Cantilever rack type KR2500
A complete upright consists of a blue upright profile, a welded foot part and 5 welded cantilever arms. One rack upright has a height of 2m.
The individual uprights are connected to each other with the help of the cross and diagonal braces. The distance between two uprights is called the axial dimension.
- Simple structure
- Best price
- All parts included
Assembly instructions
Quality of our products
Voluntary testing of our cantilever racks
In order to subject ourselves to external quality tests, we have our products voluntarily tested every year.
The racks are tested for load, rigidity and stability.
The maximum shelf and bay loads are listed on the load plates included in the delivery.
Finishes
Painted for indoor use
Single + double sided versions
Technical information
Fastening in the floor
Required parts:
Mounted shelf, bolt anchors
- Drill holes: 10mm ∅, 100mm deep
- Blow out holes
- Drive in anchor with floor bracket - nut should be flush with thread
- Tighten anchor firmly
- After tightening, the marking in the thread must not be visible!
Please note:
The bolt anchors must be fastened professionally.
If necessary, commission a specialist company!
Axle dimension
The axle dimension describes the width of a rack bay, as well as the distance between two uprights
Technical information
Assembly of cross and diagonal braces
Required parts:
upright, cross brace, hexagon bolt, hexagon nut
First, the cross struts are mounted to the top and bottom of the uprights. It is important to note that the insides of the struts point in the direction of the arms and that the struts are each open to each other, with the lower strut with the opening pointing upwards.
Required parts:
Diagonal struts, hexagonal bolt, hexagonal nut.
Now the diagonal braces can be mounted to the cross braces, in a cross shape. The diagonal braces are mounted on the outside of the cross brace. First, the screw connections are hand-tightened. When the shelf is in position, the screws are tightened firmly.
Diagonal braces + cross braces are used for stiffening between the uprights and increase their stability
Accessories - suitable for KR2500
collision protection in L-shape
different heights available > to the collision protection in L-shape
collision protection in U-shape
different heights available > to the collision protection in U-shape