2,5 m cantilever rack KR2500 / Painted / One-sided / 2 m high / 5 levels / 50 cm cantilever depth
- Ideal for storage of long goods
- Can be loaded with up to 1.250 kg per unit
- Welded feet and arms for a robust construction
- Very quick and easy to assemble
- Ideal for storage of long goods
- Can be loaded with up to 1.250 kg per unit
- Welded feet and arms for a robust construction
- Very quick and easy to assemble
-
ModelKR2500
-
Max. Load per stand1,250 kg
-
VersionOne-sided
-
Number of levels5
-
Rack layerWithout
-
Arm spacing280 mm
-
SurfacePainted
-
Width2,500 mm
-
Depth500 mm
-
Height2,000 mm
-
Axle dimension1.200 mm
- 3 x single-sided upright for cantilever rack (type: KR2500) with welded-on foot and 50 cm-long cantilevers
- All accessories, such as foot plates, screws, nuts and all assembly material
- Load capacity labels in accordance with German DGUV 108-007 specification (BGR234)
- Assembly instructions
- 5 Years warranty
- Ideal for storage of long goods
- Can be loaded with up to 1.250 kg per unit
- Welded feet and arms for a robust construction
- Very quick and easy to assemble
This extra-robust cantilever rack with a width of 2,5 m is 2 m high and has 5 levels with a cantilever depth of 50 cm. Thanks to the single-sided design with welded-on cantilever arms, you can load each upright with a maximum of 1.250 kg, where each cantilever has a maximum load of 250 kg.
The 50 cm deep cantilevers in the signal colour of blue are ideal for the storage of long goods.
The individual uprights are screwed together with two cross struts and diagonal struts (axial dimension 1.200 mm). Each cantilever has a width of 30 mm and features a 50 mm-high roll-off protection. The 60 cm-long foot part has a depth of 50 cm, a width of 50 mm and a 70 mm-high roll-off protection. This means the foot parts can also be used as a storage level.
The distance between the foot level and the first cantilever level, as well as the cantilever distance between the remaining cantilever levels, is 280 mm.
The rack is secured to the floor at each foot part with floor fixtures, each with 4 bolt anchors (M10 x 100 mm). The material required for assembly as well as assembly instructions and load capacity labels are included in the delivery volume.
Important information
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.
Combining cantilevers of different models, such as between KR3000 and KR6000, is technically not feasible. However, a mixture of different arm lengths, for example 50 cm and 100 cm, is certainly feasible. The important thing here is that the cantilever arms do not protrude beyond the cantilever feet. A combination of 50 cm and 100 cm cantilever arms would require a shelf upright with a depth of 100 cm.
Depending on the type of cantilever racking, our cantilever bays are available in painted and hot-dip galvanized versions (both versions for the KR3000/KR6000).
Depending on the type of cantilever racking, our cantilever bays are available in painted and hot-dip galvanized versions (both versions for the KR3000 / KR6000).
The individual cross and diagonal braces are mounted to the bracket of the shelf uprights with the corresponding hexagon bolts, hexagon nuts and washers.
Depending on the height of your shelves, the number of struts (cross and diagonal struts) varies.
You will find the appropriate number of braces in the article description and in the assembly instructions.
The axial dimension is the internal dimension between two shelf uprights. Depending on the cantilever type, we offer these fields in 120 cm (KR2500) and in 100 cm / 150 cm (KR3000 / KR6000).
The axial dimension is the internal dimension between two shelf uprights. Depending on the cantilever type, we offer these fields in 120 cm (KR2500) and in 100 cm / 150 cm (KR3000 / KR6000).
A rubber strip on cantilever racks is primarily used to protect your stored goods and the cantilevers from potential damage. No additional assembly is required to attach them. The rubber strips are simply glued directly to the desired cantilever arm. For our models KR3000 and KR6000 we offer special matching rubber strips.
Available bay sizes vary depending on the specific cantilever rack model:
- KR2500: Provides bays 120 cm wide, bracing included.
- KR3000: Offers bays in 100 cm and 150 cm sizes, both including bracing. These are also available in a hot-dip galvanized version.
- KR6000: This model also offers 100 cm and 150 cm bays with bracing and is available in a hot-dip galvanized version.
The scope of delivery includes the appropriate number of screws for cantilever racking assembly. The following screws are used for a cantilever racking system:
Bolt anchor, hexagonal bolts / nuts, washer, compensation wedge etc.
With certain models of our cantilever racks you can flexibly adjust the height of the cantilever arms. The KR3000 and KR6000 models offer the possibility to adjust the cantilever arms individually in 5 cm steps. In contrast, the arms of the KR2500 system are permanently welded and do not allow any height adjustment.
With certain models of our cantilever racks you can flexibly adjust the height of the cantilever arms. The KR3000 and KR6000 models offer the possibility to adjust the cantilever arms individually in 5 cm steps. In contrast, the arms of the KR2500 system are permanently welded and do not allow any height adjustment.
Cantilever racking is ideal for the storage of long goods, e.g. wooden beams, steel profiles, pipes and much more. You can additionally equip the cantilever racking with wooden or grating floors, so that the storage of other stored goods is also possible.
Cantilever racking is ideal for the storage of long goods, e.g. wooden beams, steel profiles, pipes and much more. You can additionally equip the cantilever racking with wooden or grating floors, so that the storage of other stored goods is also possible.
Cantilever racking is always fixed by anchoring it to the ground.
A combination of KR3000 and KR6000 is not possible.
Only a combination of the arms is possible with the KR3000 (50 cm, 100 cm, 125 cm) and the KR6000 (75 cm, 150 cm), as the arms of the cantilever racks for light loads KR2500 are firmly welded to the rack upright.
If you want to combine two arm lengths in your rack, the rack upright must be used in the greater depth for safety reasons, e.g. in 100 cm depth (KR3000) and in 150 cm depth (KR6000).
Here you can find an overview of our cantilever racks.
Of course we also offer shelves in individually adapted dimensions. Please send us an inquiry by e-mail to info@topregal.co.uk or call our customer hotline 01495 707222.
You can find our contact form here.