.jpg)
2,3 m Workbench base table MFW1000-AT / 120 cm deep / 750 - 1.150 mm high / 2 levels / wooden decking
- Lightweight wooden shelf insert allows easy installation
- Modular system allows combination with other rack types
- Striking signal orange and blue colour scheme
- Self-securing decking thanks to the practical stepped beams
- Lightweight wooden shelf insert allows easy installation
- Modular system allows combination with other rack types
- Striking signal orange and blue colour scheme
- Self-securing decking thanks to the practical stepped beams
-
ModelMFW1000-AT
-
Beam length2,200 mm
-
VersionBasic table
-
Number of levels2
-
Rack layerWood
-
Width2,300 mm
-
OperationNo
-
Depth1,200 mm
-
Height750 mm - 1,150 mm
- 2 x storage rack upright / 0,75 m high with 40 cm height-adjustable foot part / 120 cm deep with covers for rack upright
- 4 x storage-rack single beam 220 cm, compartment load capacity: 500 kg
- 2 x storage-rack wooden board 220 cm wide / 120 cm deep
- All accessories such as screws, nuts and all material required for assembly
- Assembly instructions
- Load capacity labels in accordance with German DGUV 208-061 specification
- 5 Years warranty
Compact and equipped with a wooden shelf: the industrial workbench from TOPREGAL
This workbench is equipped with 2 wooden rack shelves made of 25 mm-thick raw chipboard panels. Thanks to the low weight of the rack insert, the workbench is particularly easy to assemble. Thanks to the special design of our stepped beams, the wooden shelves fix themselves in place and are secured against slipping and falling out. These orange-painted beams can be individually hooked in at a grid spacing of 50 mm using the plug-in system. The height of the entire table can also be varied by up to 40 cm. This allows the workbench to be configured according to your requirements.
The external dimension of this workbench is 2,3 m; the usable shelf surface, also known as the internal dimension, is 10 cm shorter. Dry goods such as screws, assembly parts and other articles can be stored here without difficulty.
Alternatively, we also offer our storage-rack workbenches with hot-dip galvanised grid shelves, robust multiplex boards, sloping shelves or steel shelves.
A blue-painted workbench upright consists of a front and a rear upright profile. These are connected and stabilised by screwed horizontal and diagonal braces. The included cover plates close off the top of the upright and provide the necessary workplace safety.
All assembly material, such as screws and nuts, is included in the delivery.
-
ModelMFW1000-AT
-
Beam length2,200 mm
-
VersionBasic table
-
Number of levels2
-
Rack layerWood
-
Width2,300 mm
-
OperationNo
-
Depth1,200 mm
-
Height750 mm - 1,150 mm
- 2 x storage rack upright / 0,75 m high with 40 cm height-adjustable foot part / 120 cm deep with covers for rack upright
- 4 x storage-rack single beam 220 cm, compartment load capacity: 500 kg
- 2 x storage-rack wooden board 220 cm wide / 120 cm deep
- All accessories such as screws, nuts and all material required for assembly
- Assembly instructions
- Load capacity labels in accordance with German DGUV 208-061 specification
- 5 Years warranty
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (german DGUV Rule 208-061) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.
Is your question about this product not listed and still unanswered? Submit your question and our customer service team will respond promptly! We will review your submission and reserve the right to publish it.
General questions regarding service, orders or availability are answered exclusively via the contact form, chat or email.
