LED solar streetlight SL50/25, 6.000 mm high, 8 W, 25 Ah, TecMaschin

Brightly illuminate paths

This is now possible with our solar streetlight SL50/25 from TecMaschin. It makes working in 3-shift operation easy, as the 8 W-powerful streetlight floods a large area with cool white light (6.000 K). 1.280 lm and 357 LED diodes turn night into day. A solar panel mounted above the LED spotlight fully charges the internal energy storage unit (3,2 V / 25 Ah) within 3 - 4 h. The battery capacity then supplies the compact LED lamp with power for 6 - 10 h. Brightness decreases in 3 stages, depending on the charge of the internal storage unit. On cloudy days, with poor alignment to the sun or when the solar panel is obscured, this may result in incomplete charging and therefore a shorter illumination time.

The housing around the sensitive LED diodes and electrical circuits is designed to withstand both heavy splashing and dust, thereby meeting the requirements of protection class IP65. The low net weight of 8 kg allows uncomplicated installation on the lamp post.

Intelligent control with motion sensor

With various functions that can be set on the remote control, the solar lamp SL50/25 can be configured for almost any application. It can be dimmed in 4 stages. The integrated motion sensor also provides maximum efficiency. As a result, the LED lamp lights only when it is actually needed and reliably switches to energy-saving mode at 30% after 15 minutes without detecting movement. This saves energy, while this integral part of the sustainable lighting system further extends the product's service life. The desired illumination time can also be set if the lamp is required to remain permanently lit.

Stable support through a robust design

The 6.000 mm-high steel mast is hot-dip galvanised and then painted. Together with its conical shape, this surface treatment protects it against wind and weather. The lamp post is therefore neither prone to rust nor does it provide a large surface for the wind to act on. The 250 x 250 mm base firmly anchors the lamp post in the ground, making it impossible for it to tip over. The sturdy bars on the underside of the base plate are sunk into the ground, and the hole is filled with concrete. A suitably firm ground is required for this.

Installation note:

When the street light is mounted at the maximum height of 6.000 mm, the LED lamp SL50/25 illuminates an area of up to 150 m². To illuminate a path or square optimally, we recommend installing the lamp posts 15 m apart.