2 m shelving rack FB200 / 50 cm deep / 2 m high / 4 levels / rack layer Steel / compartment load capacity 200 kg
- Straightforward assembly for a rapid construction
- Simple plug-in system
- High-quality materials for long-term use
- High load capacity per compartment of 200 kg with an evenly distributed load
- Straightforward assembly for a rapid construction
- Simple plug-in system
- High-quality materials for long-term use
- High load capacity per compartment of 200 kg with an evenly distributed load
-
ModelFB200
-
Beam length1,000 mm
-
Number of levels4
-
Rack layerSteel
-
Width2,000 mm
-
Depth500 mm
-
Height2,000 mm
-
Max. Load per field1,000 kg
-
Max. Load per level200 kg
- 3 x FB200 upright, 2 m high incl. foot plate, bolt anchor, cover plates, screws
- 8 x FB200 steel board, 100 cm wide / 50 cm deep incl. mounting struts
- 16 x FB200 beam, 100 cm
- All material required for assembly, such as foot plates, screws and nuts
- Load capacity labels in accordance with German DGUV 108-007 specification (formerly BGR 234)
- Assembly instructions
- 5 Years warranty
- Straightforward assembly for a rapid construction
- Simple plug-in system
- High-quality materials for long-term use
- High load capacity per compartment of 200 kg with an evenly distributed load
This fully configured, galvanised shelving rack is quick and easy to assemble thanks to the simple plug-in system. The modular design enables customisation of this rack type. You can decide the distribution of the shelves in advance, and thus select the size of the shelf compartments in increments of 50 mm. It is also possible to expand the shelving rack with further levels as well as by adding units to the width at any time.
This shelving rack offers and incredibly high load capacity. One shelf compartment can be loaded with up to 200 kg. The maximum unit load capacity, corresponding to the total load with even distribution between two uprights, is 1.000 kg. The high-quality steel shelves are installed on 2 longitudinal and 2 transverse support beams to increase the load capacity.
In this rack type, the beams are used to secure the shelves. The integrated kerb makes it easy to insert the shelves. These have a standard length of 100 cm and fit perfectly into the compartments of the shelving rack. This means the rack with its 4 levels is quick and easy to assemble.
This shelving rack with dimensions of 2 m x 50 cm x 2 m features an impressive, high-quality finish. Further benefits of this shelving rack include its appealing look and durable construction designed for industrial use. All material required for assembly is included in the delivery volume.
Important information
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.