240 Anchor bolts (M12 x 100 mm) / stainless steel / grade A2

Securely fix racks in place

The M12 x 100 mm anchor bolts are used to professionally secure rack uprights to the floor. During installation, the approx. 100 mm-long anchor bolt is first driven into the dust-free drill hole with several firm hammer blows. The nut is then tightened with an open-ended or ratchet spanner. Like a ship’s anchor, the expansion clip at the lower end of the anchor bolt tightens inside the concrete. Anchor bolts are also known as steel anchors, heavy-duty anchors, concrete anchors, anchor bolts, impact anchors or hammer-in anchors. 

The matching nuts and washers are included in the delivery.

At a glance:                        

• Material: Stainless steel
• CE tested
• Diameter: 12 mm
• Length: approx. 100 mm
• Compliant with: EN 14399-1, EN14399-3, ISO 7089

Secure outdoor rack fixings

The effective stainless-steel anchor bolt is used to secure racks outdoors and in corrosive environments. It features a bolt thread M12 x 100 mm and is CE-tested.

Important information about our racks

All figures refer to evenly distributed loads. When loading your rack, do not exceed the shelf load or bay load. When using our racks, observe the stringent German safety standard DGUV Rule 108-007 / BGR 234 for occupational safety and health. TOPREGAL accepts no liability for accidents or damage resulting from improper use. Our expert advisory team will be happy to answer any questions.

The stated dimensions are approximate and may vary by a few centimetres. Please contact us if you require the exact dimensions for your chosen rack.