+++ FREE ++ No-obligation site visits available! ++ Contact us to arrange your visit!! +++

All products

1,2 m mobile tyre rack RR2000 / 40 cm deep / 1.740 - 2.140 mm high / 3 levels

 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
Discounts of up to 10% on the value of your cart!
£ 2,000
3 %
£ 5,000
5 %
£ 10,000
10 %
Technical data
Article No. 86241
  • Model
  • Number of levels
  • Rack layer
  • Width
    1,200 mm
  • Depth
    400 mm
  • Height
    1,740 mm - 2,140 mm
  • Max. Load per field
    500 kg
Delivery volume
  • 2 x mobile storage rack upright / 1,74 m high / height-adjustable / 40 cm deep incl. panels
  • 6 x storage-rack single beam 110 cm, compartment load capacity: 400 kg
  • 1 x transport handle – mobile storage rack/pallet rack (incl. assembly material)
  • All accessories and material required for assembly 
  • Assembly instructions
  • 5 Years warranty
  • Simple storage of tyres and rims
  • Roller bearings ensure high level of flexibility at place of use
  • Height is adjustable for ergonomic working
  • Modular design for flexible extension and adjustment
  • High-quality finish

Easy transportation of tyres

This fully configured mobile tyre rack with no rack layer is used for convenient transport of tyres, rims or similar items. The total width of this practical mobile rack is 1,2 m, though the effective contact area (usable inside dimension) is 10 cm shorter. This rack has 3 levels, where a 110-cm beam can be filled with 6 tyres or rims and a 220-cm beam can be filled with up to 12 tyres or rims.

The max. compartment load capacity (load per level) 400 kg and the max. unit load capacity (between 2 uprights with an evenly distributed load) is 500 kg.

The beams (powder-coated in orange) are easily attached to the uprights and secured using safety pins to prevent them accidentally being lifted out. The height of the beams can be adjusted individually in increments of 50 mm. The tyres are placed onto the beams and can be stored safely, protecting them from damage thanks to the special design of the stepped beam.

A mobile tyre rack upright (powder-coated in blue) comprises a front and rear upright profile, as well as 2 mobile castors fitted with locking brakes. The rack uprights are closed at the top with two specially manufactured panels to increase work safety and to provide a flush finish to the edges. The panel is simply put on and is thus easy to position.

Flexibility for your application

The working height of the mobile tyre rack can be adjusted in increments of 50 mm and ranges from 1.740 - 2.140 mm. Simply adjust the insertion height of the upright at the foot part. The complete rack is equipped with 4 castors with locking brakes and is therefore suitable for mobile use. This mobile rack is offered especially for commercial and industrial use and is also suitable for robust applications. Thanks to the modular design of our racks, they can be extended and adapted to your requirements at any time.

All material such as foot plates, screws, nuts and all small parts required for assembly are included in the price and delivery.

......read more

Important information

All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.