7,3 m cantilever rack KR2500 / painted / one-sided / 2 m high / 5 levels / 50 cm cantilever depth
★ ★ ★ ★ ★
★ ★ ★ ★ ★
(31)
- Ideal for storage of long goods
- Can be loaded with up to 1.250 kg per unit
- Welded feet and arms for a robust construction
- Very quick and easy to assemble
- Ideal for storage of long goods
- Can be loaded with up to 1.250 kg per unit
- Welded feet and arms for a robust construction
- Very quick and easy to assemble
-
ModelKR2500
-
Max. Load per stand1.250 kg
-
Versionone-sided
-
Number of levels5
-
Rack layerwithout
-
Arm spacing280 mm
-
Surfacepainted
-
Width7.300 mm
-
Depth500 mm
-
Height2.000 mm
-
Axle dimension1.200 mm
- 7 x single-sided upright for cantilever rack (type: KR2500) with welded-on foot and 50 cm-long cantilevers
- All accessories, such as foot plates, screws, nuts and all assembly material
- Load capacity labels in accordance with German DGUV 108-007 specification (BGR234)
- Assembly instructions
- 5 years warranty
- Ideal for storage of long goods
- Can be loaded with up to 1.250 kg per unit
- Welded feet and arms for a robust construction
- Very quick and easy to assemble
This extra-robust cantilever rack with a width of 7,3 m is 2 m high and has 5 levels with a cantilever depth of 50 cm. Thanks to the single-sided design with welded-on cantilever arms, you can load each upright with a maximum of 1.250 kg, where each cantilever has a maximum load of 250 kg.
The 50 cm deep cantilevers in the signal colour of blue are ideal for the storage of long goods.
The individual uprights are screwed together with two cross struts and diagonal struts (axial dimension 1.200 mm). Each cantilever has a width of 30 mm and features a 50 mm-high roll-off protection. The 60 cm-long foot part has a depth of 50 cm, a width of 50 mm and a 70 mm-high roll-off protection. This means the foot parts can also be used as a storage level.
The distance between the foot level and the first cantilever level, as well as the cantilever distance between the remaining cantilever levels, is 280 mm.
The rack is secured to the floor at each foot part with floor fixtures, each with 4 bolt anchors (M10 x 100 mm). The material required for assembly as well as assembly instructions and load capacity labels are included in the delivery volume.
Important information
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.
