Tyre racks & rim racks
In a tyre rack you store car tyres, rims and complete wheels gently and professionally. TOPREGAL tyre racks are designed in such a way that the contact surface of the tyres on the rack is minimised. Thanks to the step crossbars, this contact surface is optimally distributed over the entire tyre. Whether tyres, rims or complete wheels - we offer the right rack depth for all common tyre sizes.
Tyre rack type LR2000
The right rack depth for your tyre sizes*
13 - 15 inch
16 - 18 inch
19 - 29 Inch
* Recommendations based on the average tire size using the indicated inch size.
Number of possible levels (recommendations
)based on tyre sizes 17 inch + 18 inch
Height of the tyre rack
2.0m = 3 levels
2.5m = 3 levels
3,0m = 4 levels
3,5m = 5 levels
4,0m = 5 levels
Stationary or mobile
With the height-adjustable base with roller, your tyre rack/tyre trolley can be adjusted in height by up to 40cm. This results in individually adjustable heights of 89cm - 254cm, depending on the type and selected basic size.
Bay, shelf and point load
Stationary bay load max. 2000 kg
Mobile bay load max. 500 kg
- Total load capacity between 2 uprights
Max. shelf load 400 kg per level
- Total load capacity per truss level or per shelf
Point load per foot plate with evenly distributed load max. 1000 kg
- Point load generated by the shelf upright on the floor
Floor anchoring foot plate
The floor anchoring is done by using bolt anchors M8x55
- Drill holes: 8mm Ø, 80mm deep
- Blow out the holes
- Hammer the bolt anchor into the drilled hole
- Tighten the nut with an open-end wrench or similar
If the height of the top shelf level is less than 5 times the shelf depth, the shelf does not need to be fastened or secured against tipping.
Please note: The bolt anchors must be fastened professionally.
Our in-house assembly team will gladly take over the professional assembly of your shelves.
- The axle dimension describes the width of a shelf bay as well as the distance between two uprights.
- We offer axle dimensions in the widths 110 cm and 220 cm.
- The axle dimensions can be freely combined with each other.
- Configure your tyre rack individually with your desired bay lengths. Due to the modular construction, the racks can also be extended at any time.
Securing the cross beams
Required individual parts: Pre-assembled shelf upright, truss, securing pin.
Set up the pre-assembled uprights and hook the crossbars into the upright profile on both sides at the desired height. Insert the locking pins into the hole provided in the crossbar.
The crossbars are hung in a grid of 50mm.
Please note: Mount the last truss at least 50cm before the end of the upright!
Tyre rack with supports
Individual levels can also be fitted with a shelf to store useful items such as tools for fitting, rim cleaners, grease, wheel nuts etc. In this way a tyre rack can be adapted to individual needs.
Ideally suited for the storage of liquids, e.g. paints or oils, as they can be washed off.
Wall mounting / Connecting
For rack heights up to 2.5m we recommend the use of 2 spacers.
From a height of 3m we recommend the use of 3 spacers.
All assembly material is included in the price and scope of delivery.
Operational safety / regulation - DIN EN 15635, DGUV 108-007
Collision protection for racking systems
Collision protection to prevent possible damage to the rack upright.
Corner areas with forklift traffic must be equipped with collision protection according to DIN EN 15365 & DGUV 108-007.
Our collision protection is tested and certified according to DGUV 108-007 (formerly BGR234).
Each collision protection is delivered including four bolt anchors M12x100mm for floor fixing.
Accessories - suitable for LR2000
Lockers & Cupboards
Directly to the lockers & lockers
Directly to the safety accessories
Tyre racks - professional storage of tyres & rims
In a tyre rack you store car tyres, rims and complete wheels gently and professionally. If the car tyres are changed twice a year, the purchase of a professional tyre rack is worthwhile, because the storage of the complete wheels or tyres must be done gently, so that you do not get pressure marks due to incorrect storage. TOPREGAL tyre racks are designed in such a way that the contact area of the tyres on the rack is minimised. Thanks to the step traverses, this contact surface is optimally distributed over the entire tyre. Whether tyres, rims or complete wheels - we offer the right shelf depth for all common tyre sizes. Three available depths can be selected easily in the configurator. In the smallest version, the basic rack offers space for 8 wheels. Thanks to the modular design, any number of racks can be combined and extended. The crossbars can be hooked in individually at different heights.
The assembly of the rim rack is very easy, because it is a plug-in system. The crossbars are simply hooked into the tyre rack uprights. If you prefer to store the tyres on the wall, you can order the available wall bracket and fix the tyre rack to the wall. For transport to the car or other locations, we also offer our tire storage systems as tire carts. Equipped with four swivel castors, our mobile ty re racks offer maximum flexibility and are easy on the back.