2,3 m Mobile worktable MFW1000-ATF / 60 cm deep / 890 - 1.290 mm high / 2 levels / rack layer Wood
- Lightweight wooden board for simple assembly
- Modular system allows combination with other rack types
- Bright signal colours of orange and blue
- Self-securing rack layers thanks to the practical stepped beams
- Lightweight wooden board for simple assembly
- Modular system allows combination with other rack types
- Bright signal colours of orange and blue
- Self-securing rack layers thanks to the practical stepped beams
-
ModelMFW1000-ATF
-
Beam length2,200 mm
-
VersionBasic table
-
Number of levels2
-
MobileYes
-
Rack layerWood
-
Width2,300 mm
-
Depth600 mm
-
Height890 mm - 1,290 mm
- 2 x storage rack upright / 0,89 m high with 40 cm height-adjustable foot part / 60 cm deep with castors
- 4 x storage-rack single beam 220 cm, compartment load capacity: 500 kg
- 2 x storage-rack wooden board 220 cm wide / 60 cm deep
- 1 x storage-rack transport handle incl. assembly material
- All accessories such as screws, nuts and all material required for assembly
- Assembly instructions
- Load capacity labels in accordance with German DGUV 108-007 specification
- 5 Years warranty
- Lightweight wooden board for simple assembly
- Modular system allows combination with other rack types
- Bright signal colours of orange and blue
- Self-securing rack layers thanks to the practical stepped beams
Mobile for flexibility: the mobile worktable from TOPREGAL
Equipped with 4 castors, this worktable is easy to move from place to place, with each castor withstanding a point load of 125 kg. This means that each of our mobile worktables is limited to a unit load of 500 kg. This turns the worktable into a mobile packing station, an assembly table or a practical workbench. Thanks to the roller bearings, it is also easy to move the small parts and tools. Keep you warehouse flexible with the mobile worktables from TOPREGAL.
Practical and with wooden board: the worktable from TOPREGAL
This worktable features 2 wooden shelves made from 25 mm-thick chipboard. The worktable is extremely easy to assemble thanks to the low weight of the shelf support. Thanks to the special design of our stepped beams, the wooden boards fix themselves in place and are secured against slipping or falling out. These orange painted beams can be attached individually in increments of 50 mm thanks to the plug-in system. The height of the overall table can also be adjusted by up to 40 cm. This means the worktable can be configured to suit your needs.
The outer dimension of this worktable is 2,3 m, where the usable contact area, known as the inside dimension, is 10 cm shorter. This can be used for easy storage of dry goods, such as screws, assembly parts and other items.
Alternatively, we also offer our storage-rack worktables with galvanised mesh shelves and robust multiplex, kanban or steel boards.
A blue painted worktable upright comprises a front and a rear upright profile. These are connected by screwed-in cross struts and diagonal struts for stability. The supplied panels finish off the upright at the top and ensure the necessary occupational safety.
All material required for assembly, such as screws and nuts, is included in the delivery volume.
Important information
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.