All products

2,3 m worktable extension table MFW1000-AT / 60 cm deep / 750 - 1.150 mm high / 2 levels / rack layer plywood
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 

Discounts of up to 10% on the value of your cart!
£ 2,000
3 %
£ 5,000
5 %
£ 10,000
10 %
Technical data & downloads
Article No. 85602
  • Model
    MFW1000-AT
  • Beam length
    2,200 mm
  • Version
    extension table
  • Number of levels
    2
  • Mobile
    no
  • Rack layer
    plywood
  • Width
    2,300 mm
  • Depth
    600 mm
  • Height
    750 mm - 1,150 mm
Delivery volume
  • 1 x storage rack upright / 0,75 m high with 40 cm height-adjustable foot part / 60 cm deep with covers for rack upright
  • 4 x storage-rack single beam 220 cm, compartment load capacity: 500 kg
  • 2 x storage-rack multiplex board 220 cm wide / 60 cm deep
  • All accessories such as screws, nuts and all material required for assembly
  • Assembly instructions
  • Load capacity labels in accordance with German DGUV 108-007 specification
  • 5 years warranty
  • Robust multiplex board for easy storage of liquids
  • Modular system allows combination with other rack types
  • Bright signal colours of orange and blue
  • Self-securing rack layers thanks to the practical stepped beams

The easy way to extend storage racks: the extension table from TOPREGAL

This extension table with compact dimensions of 2,3 m x 60 cm x 0,75 m is an easy way to extend your TOPREGAL storage rack. Thanks to the modular system, you can attach this extension table to any rack type from our storage rack range. This includes our tyre racks, kanban racks, workbenches and much more.

Practical and with multiplex boards: the worktable from TOPREGAL

This worktable features 2 wooden shelves, which are finished as multiplex boards. The high-quality finish and the surface treated with hard wax oil make it much easier to store liquids and clean the shelf. Water and oil cannot get through this coating and penetrate the multiplex board. The beech multiplex board is ideal as a worktop in your workshop. 

Thanks to the special design of our stepped beams, the rack layers fix themselves in place and are secured against slipping or falling out. These orange painted beams can be attached individually in increments of 50 mm thanks to the plug-in system. The height of the overall table can also be adjusted by up to 40 cm. This means the worktable can be configured to suit your needs.

The outer dimension of this worktable is 2,3 m, where the usable contact area, known as the inside dimension, is 10 cm shorter. This can be used for easy storage of dry goods, such as screws, assembly parts and other items.

Alternatively, we also offer our storage-rack worktables with practical kanban boards, galvanised mesh shelves, 25 mm-thick wooden boards or steel boards.

A blue painted worktable upright comprises a front and a rear upright profile. These are connected by screwed-in cross struts and diagonal struts for stability. The supplied panels finish off the upright at the top and ensure the necessary occupational safety.

All material required for assembly, such as screws and nuts, is included in the delivery volume.

......read more
Notes

Important information

All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.

trusted shops
Buyer protection included
Excellent
4.87 /5.00