All products

MFW1000 worktable, 1.2m wide with 1xWS4 and 1xWST tool cabinet, 80cm deep, table height 81cm
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 

Discounts of up to 10% on the value of your cart!
£ 2,000
3 %
£ 5,000
5 %
£ 10,000
10 %
Technical data & downloads
Article No. 19701
  • Number of levels
  • Table layer
    Multiplex board
  • Width
    1.200 mm
  • Depth
    800 mm
  • Height
    810 mm
  • Max. Load per level
    500 kg
Delivery volume
  • 2 MFW1000 workbench uprights 81cm high / 80cm deep
  • 4 MFW1000 workbench single beams 110cm, unit load capacity: 500kg
  • 2 MFW1000 workbench panels 80cm deep
  • 1 WS4 tool cabinets with four drawers, 57cm high / 54cm wide / 74.5cm deep
  • 1 WST tool cabinets with blue door, 57cm high, 54cm wide/ 74.5cm deep
  • 1 25mm-thick multiplex board, beech
  • All accessories such as foot plates, screws, nuts and all material required for assembly are included

This offer is a workbench / multifunctional workbench MFW1000 of the company Topregal, tested according to BGR234. Discover our product novelty and the advantages of the MFW1000! Thanks to the MFW1000 multifunctional workbench developed by us, you will always remain flexible and can adapt the workbench to your individual needs - even afterwards. The system was developed by the company Topregal and a patent has been applied for. You need other dimensions or you have questions? Please call us! Under 07158-984391 we are available for you at any time. This workbench is specially designed for commercial and industrial use and is particularly suitable for robust use. We offer a warranty of 5 years for this item.

The construction of the multifunctional workbench MFW1000 corresponds to the industry standard. The load capacity per level is 500kg. The load capacity of the entire workbench is 1000kg. These data are valid with evenly distributed load. The included tool cabinets WS4, with four drawers, and WST, with blue door, have been designed and matched in combination with the MFW1000. Just like the table supports, the cabinets can simply be placed on the step crossbars and fix themselves in place thanks to the special design.

The outer dimension of the workbench is 120 cm. The usable support surface (inner dimension) is 110 cm per level. The workbench is 81 cm high and 80 cm deep. The workbench has two levels. On the upper one, there is a multiplex board made of beech wood as standard, which is used as a worktop. The top has been specially treated with hard wax oil, which protects it from penetration of oil, water and other liquids into the wood. Different table supports (chipboard/multiplex/steel/grid) or tool cabinets (WST or WS4) can be inserted on the lower level. The tool cabinets are supplied with 2 keys each for locking. The table levels (traverses) are individually adjustable in height in a grid of 50mm. The possibility of individual arrangement of the levels allows you to adapt this workbench to your ideas at any time and lock it at the ideal working height. The crossbars are secured with safety pins against unintentional levering out, thus enabling safe working. The table stands are finished off at the top with two specially made panels to ensure that they are largely flush and to improve the appearance and handling. The cover is plugged on and is thus easy to place. If a perforated wall is attached, an additional panel is screwed on here. Due to our plug-in system, it is possible to easily assemble or disassemble the MFW1000 multifunctional workbench at any time. Thus, it remains expandable and can be retrofitted at any time. Furthermore, it can be transported ideally due to its small space requirement in dismantled condition. All individual parts used in this article come from our storage rack range and are therefore compatible.

Optionally, the work table can be equipped with a grid perforated wall at the back. Common applications, such as tool and screw holders or similar, can be inserted and fixed in the perforated grid here. The perforated wall is 500mm high and is screwed to the workbench in combination with longer upright profiles and also prevents objects on the workbench from falling down. Alternatively, a simple push-through safety device can be attached. Raised stand profiles are not necessary for this.

You need other dimensions or you have questions? Please call us! Under 07158-984391 we are available for you at any time.


Important information

Specified dimensions are unsuitable measurements and may differ by a few centimeters. Please contact us if you need the right size for your desired product.

trusted shops
Buyer protection included
4.8 /5.00