320 bolt anchor (M12 x 100 mm) / Galvanised
- High-quality bolt anchor for safely securing attachment parts
- Time-saving assembly and disassembly of the attachment part
- The thread is protected against damage by the hammer-in pin
- High-quality bolt anchor for safely securing attachment parts
- Time-saving assembly and disassembly of the attachment part
- The thread is protected against damage by the hammer-in pin
- High-quality bolt anchor for safely securing attachment parts
- Time-saving assembly and disassembly of the attachment part
- The thread is protected against damage by the hammer-in pin
Attach racks safely
The M12 x 100 mm bolt anchors are used for professional attachment of rack uprights in the floor. During assembly, the approx. 100 mm-long bolt anchor is first driven into the cleaned drill hole with a few strong hammer blows. Then the nut is tightened using a flat spanner or ratchet. In a similar way to a ship’s anchor, the expansion clip at the lower end of the bolt anchor then tightens in the concrete. Bolt anchors are also known as steel anchors, heavy-duty anchors, concrete anchors, anchor bolts, impact anchors or masonry bolts.
The corresponding nuts and washers are included in the delivery volume.
At a glance:
- Material: Steel Galvanised
- CE-tested
- Diameter: 12 mm
- Length: approx. 100 mm
- Correspond to: EN 14399-1, EN14399-3, ISO 7089
Important information about our racks
All data refer to evenly distributed loads. When loading your rack, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work (DGUV regulation 108-007/BGR 234) apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert advisory team will be happy to answer any questions.
The specified dimensions are approximate and may differ by a few centimetres. If you need the exact dimensions of your chosen rack, please contact us.
Important information
Dimensions given are approximate and may vary by a few centimeters. Please contact us if you need the correct size for your desired product.
