Electric stacker with wide fork HE1200/3, lifting height 3.000 mm, WLL 1.200 kg, SolidHub

The SolidHub electric forklift HE1200/3 is the cost-effective alternative to purchasing a forklift truck. Small businesses in particular may not have the financial means, the space or the appropriately trained personnel to purchase a powerful forklift truck. This is where the HE1200/3 provides the perfect remedy, as it is designed precisely for operation in small and medium-sized businesses that want to move an enormous amount at low cost and with minimum effort.

Thanks to the waterproof control unit, the high-quality processed electronic high-lift truck is perfectly able to cope with the demands of harsh working conditions such as cold, humidity and dust and is ideally suited for temporary use in e.g. cold stores and production halls. The HE1200/3 is not designed for permanent use in cold stores and in rain / humidity.

The SolidHub HE1200/3 assists in transporting, picking and stacking loads up to 1.200 kg and a lifting height 70 - 3.000 mm. Due to the low noise level of 69 dB, even longer work with the electric high lift truck is pleasant.

The dimensions of the manoeuvrable, all-electric high-lift truck are perfect for use in small warehouses and production areas that nevertheless move a few goods a day and also cover distances. However, the mast height (2.030 - 3.450 mm) must be taken into account here depending on the extension status.

The ergonomically designed tiller enables user-friendly control of all lifting and lowering functions conveniently via the multifunction tiller knob. All important control instruments such as battery charge indicator, operating hours counter, emergency stop switch and key are centrally located and in the operator's direct field of vision.

Additional protection is provided by the complete enclosure of the vehicle housing, as well as the low ground clearance, thus reducing injuries in the foot area. Due to the low ground clearance, it is important that the HE1200/3 is only used on smooth, level floors and roadways. The low enclosure height and lattice construction of the mast allows good visibility through the telescopic mast - people and goods are always in view.

The motor power of 750 W supports you perfectly when transporting pallets and mesh boxes up to 1.200 kg. The battery capacity of 75 Ah guarantees a total running time of 3,5 h at full capacity. The two built-in Lead-gel batteries are maintenance-free and have a combined voltage of 24 V. These can be conveniently charged from any normal 230 V socket.When the battery is completely discharged, the charging process takes approximately 7,5 h.

Lifting speed:

• loaded 95 mm/s
• unloaded 134 mm/s

Lowering speed:

• loaded 130 mm/s
• unloaded 94 mm/s

The transport speed of 4 km/h is approximately the speed of a pedestrian. An electromechanical brake ensures easy and safe transport of the goods.
The electric high lift truck can be used up to a gradient of 5 - 7 % depending on the load. These specifications only apply to smooth industrial floors.

The smooth-running, easily manoeuvrable castors made of PU and high-quality ball bearings are standard equipment of the SolidHubHE1200/3. These PU These PU castors convince with their abrasion resistance and good grip on the ground, while rolling easily and quietly over uneven surfaces - a good middle ground between smooth running and rolling resistance. Please consider your floor load before using the HE1200/3.

Please check the compatibility of your pallets with the HE1200/3 using our technical data sheet.
The HE1200/3 stacker is designed for use with open decked pallets.

Good to know: The driver must be at least 18 years old. An introduction to the handling of the lifting device is sufficient. Of course, when working with the SolidHub electric pallet truck HE1200/3 the legal regulations must be observed and complied with.

Please inform yourself about the applicable national regulations in the country of use before commissioning. The commissioning engineer is responsible for commissioning the device and for selecting suitable personnel for its use.

IMPORTANT - Handling the battery:
Please follow the instructions for using the battery in the operating instructions. It is important not to allow the battery to become empty under any circumstances. It is therefore recommended that the battery is charged regularly, even when the appliance is not in use.