All products

2,3 m mobile individual rack IR2000 / 1.390 - 1.790 mm high / 120 cm deep / 4 levels
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 

Discounts of up to 10% on the value of your cart!
£ 2,000
3 %
£ 5,000
5 %
£ 10,000
10 %
Technical data & downloads
Article No. 86516
  • Model
    IR2000
  • Number of levels
    4
  • Width
    2,300 mm
  • Depth
    1,200 mm
  • Height
    1,390 mm - 1,790 mm
  • Max. Load per field
    500 kg
  • Max. Load per level
    500 kg
Delivery volume
  • 2 x mobile storage rack upright / 1,39 m high with 40 cm height-adjustable foot part / 120 cm deep
  • 8 x storage-rack single beam 220 cm, compartment load capacity: 500 kg
  • 1 x transport handle
  • All accessories such as screws, nuts and material required for assembly
  • Assembly instructions
  • 5 years warranty
  • Rack uprights with roller bearings for increased flexibility in everyday warehouse operations
  • Height of the levels adjustable in increments of 50 mm
  • Modular design for simple adjustment and extension of the rack
  • High compartment and unit load capacities of 500 kg
  • Straightforward assembly thanks simple plug-in system

Mobile individual rack: flexible and extendible

This complete, mobile and fully configurable rack is used for handy storage and transportation of goods, parcels, small parts, liquids, tyres, rims or other piece goods. We offer you a suitable shelf support for every need. You can choose from wooden boards, steel boards, mesh shelves, multiplex boards or wooden kanban shelves. Alternatively, you can opt for a rack without a rack layer.

The outer dimension is 2,3 m. The usable contact area (inner dimension) is 10 cm narrower and corresponds to the chosen beam length. You can easily store your goods on the 4 levels. These must not exceed a maximum load of 500 kg per unit and 500 kg per compartment. All data refer to evenly distributed loads.

Simple to assemble and quick to transport

The beams (powder-coated in orange) are easily attached to the uprights and secured using safety pins to prevent them accidentally being lifted out. Their height can also be adjusted individually in increments of 50 mm.

A mobile rack upright (powder-coated in blue) comprises a front and rear upright profile, as well as 2 mobile castors fitted with locking brakes. The rack uprights are closed at the top with two specially manufactured panels to increase work safety and to provide a flush finish to the edges. The panel is simply put on and is thus easy to attach.

The work height of the mobile and freely configurable rack is individually adjustable in 50 mm increments and ranges from 1.390 - 1.790 mm. Only the insertion height of the upright at the foot part has to be adjusted.

The complete rack is equipped with 4 castors with locking brakes and is therefore suitable for mobile use. This mobile rack is offered especially for commercial and industrial use and is suitable for various working conditions.

Thanks to the modular design of our racks, they can be extended at any time by attaching additional beam levels and adapted to your requirements by inserting various shelves.

All material such as foot plates, screws, nuts and all small parts required for assembly are included in the price and delivery.

......read more
Notes

Important information

All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.

trusted shops
Buyer protection included
Excellent
4.87 /5.00