16 m cantilever rack KR6000 / painted / one-sided / 3 m high / 150 cm cantilever depth / 7 levels
★ ★ ★ ★ ★
★ ★ ★ ★ ★
(30)
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Enormous load capacity with up to 3.000 kg per stand
- Cantilevers can be attached individually in increments of 100 mm
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Enormous load capacity with up to 3.000 kg per stand
- Cantilevers can be attached individually in increments of 100 mm
-
ModelKR6000
-
Beam length1.500 mm
-
Max. Load per stand3.000 kg
-
Versionone-sided
-
Number of levels7
-
Rack layerwithout
-
Surfacepainted
-
Width16.000 mm
-
Depth1.500 mm
-
Height3.000 mm
-
Range of applicationindoor
-
Axle dimension1.500 mm
- Technical drawing KR6000 cantilever 75cm (German)
- Technical drawing KR6000 cantilever 150cm (German)
- Technical drawing KR6000 foot 150cm double-sided (German)
- Technical drawing KR6000 upright (German)
- Technical drawing KR6000 foot 150cm single-sided (German)
- Technical drawing KR6000 foot 75cm double-sided (German)
- Technical drawing KR6000 foot 75cm single-sided (German)
- 11 x upright / 3 m high / up to (type: KR6000)
- 10 x cantilever rack unit (strutting) for 3 m height, axial dimension 1.5 m (type: KR6000)
- 77 x cantilever 1.500 mm deep up to 1.000 kg (type: KR6000)
- All material required for assembly
- Load capacity labels in accordance with German DGUV 108-007 specification (formerly BGR 234)
- 5 years warranty
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Enormous load capacity with up to 3.000 kg per stand
- Cantilevers can be attached individually in increments of 100 mm
The TOPREGAL cantilever racks KR6000 feature a particularly robust, modular and flexible design.
This cantilever rack in a single-sided design with a width of 16 m is 3 m high, with an overall depth of 190 cm, and features 7 cantilever levels, with a cantilever depth of 150 cm. The maximum load per cantilever is 1.000 kg. The cantilevers can be attached at individual heights in increments of 100 mm and are secured with safety bolts and pins. The foot parts can also be used as a storage level (depending on the goods). To protect the load from accidentally slipping, roll-off protection can be attached at the end of each cantilever. This is included as standard in the delivery volume.
The upright load is maximum 3.000 kg. The axial dimension (inner dimension between two uprights) is generally 150 cm. At specific widths, the rack ends with a unit with an axial dimension of 100 cm. Best of all, you can extend your rack in terms of width or number of levels at any time.
This rack is powder-coated in the signal colours of blue and orange (painted). This makes it particularly suitable for use in warehouses, dry indoor areas, etc.
The galvanised and weatherproof variants of our cantilever racks are particularly suitable for applications in outdoor areas, cold stores or other corrosive environments, for example. These racks are also available in our range.
This cantilever rack of the KR6000 type has no shelf support.
Important information
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.
