All products

Type KR2500

Cantilever rack KR2500

Please select your type KR2500

Width
Attribute
Height
Attribute
Arm depth
Attribute
Number of layers
Attribute
Version
Attribute

22 Items

  1. 1
  2. 2
  1. 1
  2. 2
Product description

Cantilever rack type KR2500

Light loads up to 2500KG

A complete upright consists of a blue upright profile, a welded foot part and 5 welded cantilever arms. One rack upright has a height of 2m.

The individual uprights are connected to each other with the help of the cross and diagonal braces. The distance between two uprights is called the axial dimension.

  • Simple structure
  • Best price
  • All parts included

Quality of our products

Voluntary testing of our cantilever racks

In order to subject ourselves to external quality tests, we have our products voluntarily tested every year.

The racks are tested for load, rigidity and stability.

The maximum shelf and bay loads are listed on the load plates included in the delivery.

Finishes

Painted for indoor use

Single + double sided versions

Click here for prices and product overview

Stand overview

Single sided stand

  • 5 cantilever arms are already firmly welded on
  • Foot part is already firmly welded

Double sided stand

  • 10 cantilever arms are already firmly welded
  • Foot part is already firmly welded

Stand load

One-sided max. 1250KG

  • 5 cantilever arms are already firmly welded
  • Foot part is already welded

Double sided max. 2500KG

  • 10 cantilever arms are already firmly welded
  • Foot part is already welded

Technical information

Fastening in the floor

Required parts:
Mounted shelf, bolt anchors

  • Drill holes: 10mm ∅, 100mm deep
  • Blow out holes
  • Drive in anchor with floor bracket - nut should be flush with thread
  • Tighten anchor firmly
  • After tightening, the marking in the thread must not be visible!

Please note:
The bolt anchors must be fastened professionally.

If necessary, commission a specialist company!

Axle dimension

The axle dimension describes the width of a rack bay, as well as the distance between two uprights

directly to the single part page

Technical information

Assembly of cross and diagonal braces

Required parts:
upright, cross brace, hexagon bolt, hexagon nut

First, the cross struts are mounted to the top and bottom of the uprights. It is important to note that the insides of the struts point in the direction of the arms and that the struts are each open to each other, with the lower strut with the opening pointing upwards.

Required parts:
Diagonal struts, hexagonal bolt, hexagonal nut.

Now the diagonal braces can be mounted to the cross braces, in a cross shape. The diagonal braces are mounted on the outside of the cross brace. First, the screw connections are hand-tightened. When the shelf is in position, the screws are tightened firmly.

Diagonal braces + cross braces are used for stiffening between the uprights and increase their stability

Cantilever arms

Firmly welded cantilevers

Cantilever arms have a length of 50cm with welded anti-roll device

Arm load

Total load per cantilever arm
Maximum 250kg with evenly distributed load

Application examples

Optimal for long goods

Accessories - suitable for KR2500

Crash protection plank 40cm

different lengths available > to planks 40cm high

Crash protection plank 80cm

different lengths available > to the planks 80cm high

collision protection in L-shape

different heights available > to the collision protection in L-shape

Magnetic tapes

different widths available > to the magnetic tapes

collision protection in U-shape

different heights available > to the collision protection in U-shape

trusted shops
Buyer protection included
Excellent
4.87 /5.00