6,4 m cantilever rack KR3000 / hot-dip galvanised / double-sided / 3 m high / 100 cm cantilever depth / 3 levels
★ ★ ★ ★ ★
★ ★ ★ ★ ★
(30)
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Enormous load capacity with up to 1.500 kg per stand
- Cantilevers can be attached individually in increments of 50 mm
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Enormous load capacity with up to 1.500 kg per stand
- Cantilevers can be attached individually in increments of 50 mm
-
ModelKR3000
-
Beam length1.500 mm
-
Max. Load per stand1.500 kg
-
Versiondouble-sided
-
Number of levels3
-
Rack layerwithout
-
Surfacehot-dip galvanised
-
Width6.400 mm
-
Depth1.000 mm
-
Height3.000 mm
-
Range of applicationoutdoor
-
Axle dimension1.500 mm
- Assembly & operating instructions: KR3000 (UK)
- Technical drawing KR3000 upright stands (German)
- Technical drawing KR3000 foot 100cm double-sided (German)
- Technical drawing KR3000 foot 50cm single-sided (German)
- Technical drawing KR3000 cantilever 100cm (German)
- Technical drawing KR3000 foot 50cm double-sided (German)
- Technical drawing KR3000 cantilever 50cm (German)
- 5 x upright 3 m high for 1.000 mm cantilevers up to 1.500 kg (type: KR3000 galvanised)
- 4 x cantilever rack unit (strutting) for 3 m height, axial dimension 1.5 m (type: KR3000 galvanised)
- 30 x cantilever 1.000 mm deep up to 500 kg (type: KR3000 galvanised)
- All material required for assembly
- Load capacity labels in accordance with German DGUV 108-007 specification (formerly BGR 234)
- 5 years warranty
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Enormous load capacity with up to 1.500 kg per stand
- Cantilevers can be attached individually in increments of 50 mm
The TOPREGAL cantilever racks KR3000 feature a particularly robust, modular and flexible design.
This cantilever rack in a double-sided design with a width of 6,4 m is 3 m high, with an overall depth of 220 cm, and features 3 cantilever levels, with a cantilever depth of 100 cm. The maximum load per cantilever is 500 kg. The cantilevers can be attached at individual heights in increments of 50 mm and are secured with safety bolts and pins. The foot parts can also be used as a storage level (depending on the goods). To protect the load from accidentally slipping, roll-off protection can be attached at the end of each cantilever. This is included as standard in the delivery volume. The maximum unit load capacity (even total load between two uprights) is 1.500 kg.
The upright load is maximum 1.500 kg. At specific widths, the rack ends with a unit with an axial dimension of 100 cm. Best of all, you can extend your rack in terms of width or number of levels at any time.
The surface of this rack is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores, in corrosive environments or similar.
This cantilever rack of the KR3000 type has no shelf support.
Important information
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.
