This online shop uses cookies to provide you with an optimal shopping experience. For example, session information or language settings are stored on your computer. Without cookies, the functionality of the online shop is limited. If you do not agree, please click here. OK, got it



3.3m cantilever rack (type: KR3000 painted) 4m high single-sided with 5 levels 100cm deep
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
0 reviews

Discounts of up to 10%
on the value of your cart!
Overview / specification
  • Width
  • Height
  • Depth
  • Number of layers
    5 levels
  • Max. load per layer
  • Version
  • Rack layer
  • Surface
New, complete cantilever rack – single-sided design – 3.3m wide, 400cm high and 5 cantilever levels with a cantilever depth of 100cm. The maximum load per cantilever is 500kg. The unit load capacity (total load capacity between two uprights) is 1500kg.

This cantilever rack is characterised by its particularly robust construction.

The surface of this upright is powder-coated (painted). This makes it particularly suitable for use in dry indoor areas, warehouses or similar.

The foot parts can also be used as a storage level

To prevent the load from accidentally slipping, roll-off protection can be attached at the end of the cantilever. This is included as standard in the delivery volume. The cantilevers can be attached at individual heights in 50mm increments and are secured with safety bolts and pins.

The external dimension of this rack is 3.3m.
The axial dimension (inner dimension between two uprights) is always 150cm.

All individual parts used in this product correspond to our cantilever rack range and are thus compatible and expandable.
Delivery volume
  • 3 complete uprights 4m high for 100cm cantilevers single-sided up to 1500kg (painted RAL 5005)
  • 2 cantilever-rack units (struts) for 4m height, axial dimension 1.5m (painted RAL 5005)
  • 15 cantilevers 100cm deep up to 500kg (painted RAL 5005)
  • All material required for assembly such as screws, nuts, bolt anchors as well as assembly instructions and load capacity labels are included
Important information about our racks

All data refer to evenly distributed loads. When loading your shelves, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert team of consultants will be happy to answer any questions you may have.

Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.