All products

Type KR3000

Cantilever Rack KR3000

The robust KR3000 cantilever rack is ideally suited for storing long and standing goods. The rack is available - depending on your needs - in single & double sided versions as well as optionally with shelves.

For use in wind & weather, this type of shelving is also available in hot-dip galvanized version.

The cantilevers are offered in 50cm, 100cm & 125cm depth.

For flexible use, the cantilever arms can be hung individually in 5cm increments.

Which shelf support fits me?

No support
No surcharge
read more
Optimal for storing steel beams and pipes
Wooden boards
read more
For storage of pallets, parcels and transport boxes
Galvanized mesh
read more
For storing drums, buckets and liquids

%s Items

Product description

Cantilever rack type KR3000

Medium heavy loads up to 3000KG
  • Rack height 2m - 4m
  • single + double sided cantilever rack with freely adjustable arms in a 5cm grid in height
  • connection of cantilever uprights is made by cross and diagonal braces
  • Upright profile is screwed to the base
  • Easy to assemble
  • Best price
  • All parts included

Quality of our products

Voluntary testing of our cantilever racks

In order to subject ourselves to external quality tests, we have our products voluntarily tested every year.

The racks are tested for load, rigidity and stability.

The maximum shelf and bay loads are listed on the load plates included in the delivery.


Painted for indoor use

Single + double sided versions

Click here for prices and product overview

Hot-dip galvanized for outdoor use

Hot-dip galvanized racks for outdoor use

Overview uprights cantilever rack KR3000

One-sided upright

Stability due to T-beam

Double sided upright

2 different depths - 50cm arm depth (80cm foot depth) and 100cm arm depth (130cm foot depth)

Complete rack stand consists of a double C-profile and the foot part in the form of a T-beam (foot). The upright profile is screwed on the foot.

(see exploded view assembly upright)


Versions + mass

Stand load

One-sided max. 1500KG

Double sided max. 3000KG

Loads are valid with evenly distributed load

Mounting stand

Load on foot section

The area of the foot part of the cantilever rack can be loaded infinitely.

Technical information

Fastening in the floor

Required parts
:assembled shelf, bolt anchor

  • Drill holes: 12mm ∅, 100mm deep.
  • Blow out holes
  • No floor bracket needed. Holes are already integrated / pre-drilled in the base part.
  • Drive in bolt anchor with base holder - nut should be flush with thread
  • Tighten anchor firmly
  • After tightening, the marking in the thread must not be visible!

Please note:
The bolt anchors must be fastened professionally.

Our in-house assembly team will gladly take over the professional assembly of your shelves.

Here you can learn more about our shelf assemblies

Axle dimensions

  • The axle dimension describes the width of a rack field, as well as the distance between two uprights.
  • We offer two different axle dimensions in the widths 100cm & 150cm.
  • The different axis dimensions can be freely combined with each other
  • Configure your cantilever rack individually with your desired bay lengths. Our racks can be extended at any time, due to the modular construction.

Assembly struts

Technical information

Assembly of cross and diagonal braces

Required parts:
diagonal brace, cross brace, hexagon bolt, hexagon nut, washer

  1. The assembly of the cross and diagonal braces is done by means of M10*80 hexagonal bolts, M10 washers, M10 nuts and retaining plates directly on the upright profile
  2. with a 17mm open-end wrench and a ratchet with 17mm nut the assembly is done in a few minutes

Diagonal braces + cross braces are used for stiffening between the uprights and increase stability

Cantilever arms

Max. Load per arm = 500kg

Arm is suitable for one-sided and double-sided design.

Arm load

  • Total load per cantilever armMaximum
    500kg with evenly distributed load

Assembly of cantilever arms

Technical information

Assembly of the cantilever arms

1. bring cantilever arm to desired height

2. hook in locking pin

3. attach safety pin

4. attach roll-off protection

Cantilever arm accessories

Cantilever arm separator

For dividing the cantilever arms into separate compartments

Cantilever rack Rubber strip

Protects against scratching and slipping

Examples of use

Optimal for long goods

Accessories - suitable for KR3000

Crash protection plank 40cm

different lengths available > to planks 40cm high

collision protection in U-shape

different heights available > to the collision protection in U-shape

cantilever separator

painted and hot-dip galvanized > to the cantilever arm separators

Magnetic tapes

to the magnetic tapes

trusted shops
Buyer protection included
4.9 /5.00